Cabinet Door Questions · Trinity Doors
Hinge preparation is part of the door specification, not a universal add-on. These answers explain what information a manufacturer needs and make clear that Trinity Doors manufactures components but does not install cabinetry.
On this page
Hinge boring is the machining of cup holes and, where specified, fastener holes for concealed hinges. The pattern depends on the hinge brand, cup diameter, setback, overlay, cabinet construction, and top or bottom position. Provide the exact hardware specification; “standard hinge” is not enough information.
The current FAQ says hardware preparation depends on the door style and hinge type. Trinity's current boring equipment, supported patterns, cup sizes, edge setbacks, drilling options, and order form must be verified before promising the service. Require customers to submit exact hinge information.
A concealed hinge mounts inside the cabinet and is largely hidden when the door is closed. Different models are made for face-frame or frameless cabinets, inset or overlay doors, opening angles, and soft-close functions. Door boring and cabinet mounting plates must match the selected system.
The hinge and mounting plate determine how far an overlay door covers the opening or frame. Two doors with the same size can fit differently when the hinge or plate changes. Confirm overlay, cabinet type, hinge model, plate height, and boring location as one system before ordering.
Possibly, if the new door thickness, overlay, weight, boring pattern, and edge clearance match the existing hardware. Old or worn hinges may not adjust correctly. Give the installer or Trinity the exact hinge model and measurements instead of assuming all concealed hinges use the same pattern.
Often, yes, when the hinge is compatible with the cabinet construction, overlay or inset layout, door thickness, weight, and boring pattern. Soft close is a hardware function, not a cabinet-door style. Have the installer confirm the hinge and mounting plate before the doors are bored.
Yes, a qualified cabinet professional can often bore doors on site, but the correct jig, bit, depth, setback, and placement are required. One drilling mistake can ruin a made-to-order door. Customers without the right equipment should have the cabinet shop or installer handle the work.
The live site lists hinges, drawer slides, edge banding, glue, screws, fasteners, corbels, plywood, lumber, and other shop supplies. Verify the current inventory and whether products are pickup-only before publishing details. Do not promise a brand, size, quantity, or delivery option not shown in current stock.
Some homeowners can complete a straightforward replacement when the old boxes are sound and the new doors match the existing sizes and hinge system. Changes to overlay, inset fit, hinge boring, drawer fronts, or exposed cabinet surfaces add difficulty. Trinity manufactures the parts; the homeowner is responsible for installation or hiring an installer.
Send Trinity Doors your dimensions, drawings, or profile questions. The Vidor manufacturing team can confirm what is available for the specific order.
